February 22, 2018, 08:16:41 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to TINACloud, the cloud based version of TINA, running in your browser without any installation and anywhere in the world. For limited time, now you can get it for free if you purchase a new license or upgrade to v10 version of TINA at  With this great extension you can present or modify your designs wherever you are in the world and even while travelling.

We are eager to hear from you any comments and feedback.
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Fix joint and push button  (Read 22682 times)
Posts: 2

View Profile
« on: August 19, 2010, 06:50:22 PM »

How to fix joint a brick for instance and a pushbutton so that the pushbutton (PB) is working as normally?
The idea is to have a object to move around with the PB.
If attache the Brick and PB Base to the fix joint then the button is not follow the brick and PB base.  Undecided
« Last Edit: August 20, 2010, 02:08:20 AM by bob » Logged
Global Moderator
Posts: 5

View Profile WWW
« Reply #1 on: October 08, 2010, 06:36:23 AM »

This post was also answered in the technical support section. here is the answer:

In the attachment you can find a solution. I did the following:
1. put a temporary ball into the position of the "pushbutton_slider", and linked to the slider. in the material page uncheck "collision".

for a better view set the transparency to half opaque of the "pushbutton_base". now if you click on the push button, you can see, that the "pushbutton_top" and the temporary ball will move.

2. connect the 'green brick" the temporary ball, and the pushbuton_base into a fix joint.

3. also added a hinge joint, which rotates the brick.


Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!