DesignSoft
February 22, 2018, 08:24:36 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to TINACloud, the cloud based version of TINA, running in your browser without any installation and anywhere in the world. For limited time, now you can get it for free if you purchase a new license or upgrade to v10 version of TINA at www.tinacloud.com.  With this great extension you can present or modify your designs wherever you are in the world and even while travelling.

We are eager to hear from you any comments and feedback.
 
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Oscilloscope runs slow when multiple circuits  (Read 3230 times)
SpyderMan
Newbie
*
Posts: 8


View Profile
« on: September 13, 2009, 01:29:35 PM »

Hi,

I find that when I have a two or three circuits using op amps etc the oscilloscope runs very slowly.

For example if I load the AM modulator circuit in the examples folder and then add an opamp circuit to produce a pulse every few seconds the scope slows to a crawl.

I have a decent computer so I dont think its that.

Any ideas

Albert
Logged
Michael
Global Moderator
Newbie
*****
Posts: 2


View Profile
« Reply #1 on: September 14, 2009, 10:48:43 AM »

Hi, can you save your circuit file (.TSC) and attach to your next post?

With the proper circuit and settings it should still run fast. Note that appart from real time measurements, where you can measure anything, in a simulator you should have a circuit where the simulation runs fine, otherwise you cannet get your curves on the virtual oscilloscope.
Logged
SpyderMan
Newbie
*
Posts: 8


View Profile
« Reply #2 on: September 14, 2009, 11:09:36 AM »

Hi,

I found out what the problem was.

When I copied one circuit into my existing one the Analysis/transient setting was set to end display 1 second, once I set it to 1n second then it worked ok.

I presume that the software was trying to work out a high frequnecy signal for too long a period of time.

Thanks anyway
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!