DesignSoft
February 22, 2018, 08:13:33 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to TINACloud, the cloud based version of TINA, running in your browser without any installation and anywhere in the world. For limited time, now you can get it for free if you purchase a new license or upgrade to v10 version of TINA at www.tinacloud.com.  With this great extension you can present or modify your designs wherever you are in the world and even while travelling.

We are eager to hear from you any comments and feedback.
 
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: New to simulation  (Read 139 times)
Iain
Newbie
*
Posts: 1


View Profile
« on: January 16, 2018, 08:49:59 AM »

I am an electronic design engineer with almost 40 Years experience, but this is my first steps into simulation so please be gentle !
A couple of things that I feel a bit uneasy about after fiddling with very basic transistor circuits. Firstly it seems that I can select a transistor that specwise is not appropriate to the circuit eg a small signal one instead or a power one and the simulator does not complain even though I am passing amps through a 50mA device !
Also how is hfe established ..... looking at spec sheets this can vary depending on collector current and indeed generally can be quite wide, how does the Simulator model handle this ?
I suppose in general how close are the models to the real thing and Why does the simulation not throw up errors is the operating conditions are out with the device capabilities.

Iain
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!