DesignSoft
January 20, 2018, 10:59:36 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to TINACloud, the cloud based version of TINA, running in your browser without any installation and anywhere in the world. For limited time, now you can get it for free if you purchase a new license or upgrade to v10 version of TINA at www.tinacloud.com.  With this great extension you can present or modify your designs wherever you are in the world and even while travelling.

We are eager to hear from you any comments and feedback.
 
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Simulation PIC with HEX-file  (Read 78 times)
JSE009
Newbie
*
Posts: 1


View Profile
« on: December 17, 2017, 06:14:02 AM »

I hope someone can help me out.
I am trying to simulate some PIC uController (16F628A and 16F877A) with HEX compiled file but whatever I try I can not start the simulatin (DIG).
I can load the hex-files but when starting (DIG) the simulation will not start Undecided
I am using Tina v11 and for testing I have compiled HEX-files with FlowCode 6 and Proton.
Someone any idea what I do wrong?

I also try to load the ASM-file and compiled it via Tina and load it into the MCU (no erros) but still the simulation will not start.
« Last Edit: December 17, 2017, 06:29:33 AM by JSE009 » Logged
horvatht
Global Moderator
Full Member
*****
Posts: 145


View Profile
« Reply #1 on: December 18, 2017, 09:34:42 AM »

Please check your circuit: if it contains analog components then you should use the TR mode instead of the DIG mode. The DIG mode can be only used for pure digital circuits.

If the simulation doesn't start in TR mode either then please contact the Tech support service at https://www.tina.com/techsup&id=Tina and send your circuit.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!