DesignSoft

Edison => Analysis => Topic started by: hessa59 on January 19, 2011, 09:15:06 AM



Title: rotating parts in 3d view breaks connection in schematic editor
Post by: hessa59 on January 19, 2011, 09:15:06 AM
When ever I rotate parts with wires on them in the 3d view, they rotate okay and the wires stay attached. I can click switches and the circuit still works.
However, if I stop the simulation or bring up the schematic editor I will see that the connections to the part are broken.

If I restart the simulation the circuit no longer works even though the wire still seems to be attached in the 3d view. I have to go back and reattach the wire in the schematic editor to get the circuit to work.

Is there anyway around this?